WORKSHOP

Helpful Tips and Tricks for Organizing Your Garage or Workshop

Toolbox Labels with Magnets

I was fed up with having to guess which toolbox drawer had the one I needed, so I purchased magnetic business cards from an office supply shop. A piece of card stock (used business cards work excellent) was pasted on top of the film and each drawer was labeled. Laura Vogel is the author of this post.

The Pallet Dolly

I didn’t want to lug a truckload of timber down a lengthy corridor to my business one armload at a time. Then I observed the pallet on which it was sitting. Unfortunately, I lacked the necessary tools for the job, but I did have a spare set of wheels.

Adding a four-inch caster to each of the pallet’s four corners was a cinch once I erected some reinforcement blocks. It’s now my go-to heavy-stuff transporter. “Keith Jones”

It’s up to you.

Standard pegboard hooks for basic hand tools are available at most hardware and home retailers, but many also offer specialist hangers. Other doodads like the wire basket and bins may be used to arrange difficult-to-hang items like the circular saw shelf. Pegboard Circular Saw Shelf: Pegboard Circular Saw Shelf: Pegboard Circular Saw Shelf: Pegboard Circular Saw Shelf

Cuts Rags with Ease

I use old t-shirts and towels as rags in my store, much like many DIYers. Once the material has been sliced into smaller pieces, I clamp a sharp utility knife in my bench vise to begin cutting. If you’re cautious, the knife may be used to make the complete cut. It’s a success! Isaac Richardson.

A ruler for the floor

Every time you want to take a significant measurement, you don’t even have to look for a ruler. Make a ruler out of a felt-tipped permanent ink marker and place it on your shop floor. While it won’t be exact enough for precise measures, it will save you time and effort while rough cutting. When the marks begin to fade, just re-paint them. “Cheryl” Smith

Organizer for Small Shops

The bench-top power equipment (table saw, router table, scroll saw, and miter saw) in my little shop are often in use. All my bench-top tools are mounted on 1/2-inch thick plywood bases and stored on wall hooks to keep the shop clutter-free. Two huge C-clamps are all I need to attach the plywood base to my worktable when I require the tool. — Roger L. Favorite.

Cord and Hose Organization in the Garage

Extension cables, rope, and air hoses can be easily hung out of the way with this one-hour DIY. Make your own cable rack to keep them tangle-free and easy to reach!

Build Your Own Garage Organization System Using a Pallet.

The storage of tools with long handles might be a hassle. A pallet, a few screws, and a drill are all you need for this simple organizing trick. Pallets are simple to get by for free if you don’t already have some sitting around. If you’re on a budget, this is a quick and simple way to put all of your garage equipment in one place.

A fence, shed, or the exposed wall studs in your garage would all work well as mounting points for this pallet. The screws should be long enough to penetrate the pallet and anything else you’re connecting it to. The pallet was secured with two screws, while the exposed wall studs were secured with one screw apiece. Because the pallet isn’t very heavy, you won’t need a lot of screws or nails.

This is an easy and (perhaps) cheap method to keep your lawn equipment organized.

Gear for Sports Corral

Balls may be stored in this robust corral, which makes it easy for youngsters to get the balls at the bottom without having to unload all the ones on top. Using 3/4-in. plywood and 2x2s, it’s constructed. Our ball corral is 24 in. wide x 33 in. high x 12 in. deep, and we built it ourselves.

Bungee cord hooks may be dangerous, thus we decided to remove the hooks. The elastic cord found at camping, sports goods, and hardware shops would work just as well (if not better). Knot the string in the pre-drilled holes to keep it in place. It is simpler to weave the cables through bigger holes.

Outside of the corral, there are plumbing hooks and short gutter gutters that make it easier for children to store their smaller balls, helmets, and gloves.

DIY Garage Storage System With Hooks Above

Store medium and lightweight items on ceiling-mounted shelves. This vacant area above the garage doors is a perfect match for wooden overhead garage storage racks. To accommodate a shelf and 12-1/2-inch-high plastic bins, you’ll need 16 inches of clearance. However, you may alter the shelf height and place them in whatever position you choose.

Aside from weight, there is no other restriction. A normal ceiling structure can sustain a load of roughly 160 lbs., so we developed this 4-by-6-foot shelf to handle that much weight.

Sliding Pegboard Organization

Basic workshop storage is given a modern twist in this design. Pegboard is utilized on both sides of seven pieces enclosed in a small box. Keeping all of your hand tools organized has never been easier thanks to our pegboard storage system.

A Garage Storage Cabinet That Is Locked

There are a number of harmful equipment and materials around the house, particularly in your workshop and garage, which your children may easily get. It’s a secure location to keep chemicals, pesticides and other potentially hazardous items in this lockable storage cabinet.

The cabinet may be transformed into a pantry, cleaning supply closet, or hobby center simply painting or staining it.

Corner Shelves That Can Be Rotated

With these shelves, you can make the most of a nook in your garage. They are swung around by two lazy Susans, one at each end (under the top shelf). The top shelf can’t fall over if it’s fastened to the wall using screws.

Folding Workbench

No workshop, no matter how little, is complete without a sturdy workbench with plenty of storage. As early as the morning, you may begin working on your projects on this space-saving beginning workstation.

The Tool Caddy for the Garden or Garage

When I was putting up a fence, I had some leftover wood and plastic lattice from the project. In instead of chucking all of my garden tools into the trash, I decided to make a caddy to keep them all in one place. It’s on casters now so I can roll it into a tight spot in my garage. Great! — Philip J. Gruber.

Tubes for Storage in the Garage

To keep baseball bats, long-handled equipment, and rolls of anything organized, use cardboard concrete making tubes. Each tube is secured to a garage stud using plumbing straps that are resting on a piece of 2×4.

An On-the-Go Workshop

With a movable workstation in your garage, you may use it for both parking and working. When you’re done working, you can simply roll it up against the wall to reclaim your parking place. The rolling bench pictured here started life as a simple 2×4 and plywood construction.

Ingenious Ideas for Repurposing Garage Space

Make use of that dusty old wooden tennis racquet you’ve had for years by turning it into a guitar. Screw the handle to the bottom of a workbench by drilling a hole in the handle. The racquet should be positioned such that it may swing in and out of the table as needed. It’s perfect for storing tiny tools, components, and other essentials.

Extension Cords for Garage Doors

Isn’t it nice to have a little more space in your garage? You’re right. Extension cords may be stored on your garage door.

Using bungee cords with the ends cut off, hang extension cables from screw eyes spaced approximately eight inches apart. You now have a “corral” of bungee cords to keep all of your extras in. (Yes, when the door opens and shuts, they will remain in place.)

Shelves for Under-Joists

Heavy-duty wire shelves fit well in the void between rafters in a basement or garage that would otherwise go unused. You can see what’s on top of the wire shelf since it’s transparent. You can keep things like fishing gear boxes and coolers out of the way while still making them easy to reach.

CHECK FOR MORE ARTICLES

Similar Posts

Leave a Reply

Your email address will not be published.